Certificate for Haliade-X 12 MW

In June 2020, GE announced that the Haliade-X 12 MW received a provisional type certificate from DNV-GL. This makes it the most powerful turbine in the world, a step closer to full type certification. This is the ‘IECRE Provisional RNA Component Certificate’, which demonstrates that GE’s Haliade-X prototype meets the highest safety and quality standards.

In collaboration with Sif and Pondera, GE has built a prototype of the Haliade-X in the ports of Rotterdam. In January, the turbine was already setting a new record by producing 288 MWh of electricity in 24 hours. The turbine in Rotterdam is part of the type certification for the final roll-out of the new GE’s Haliade-X turbines.

The type certification is required to demonstrate that the new turbine works safely, reliably and according to the requirements. John Lavelle, CEO of Offshore Wind at GE Renewable Energy has stated:
 
This is a very important milestone for us as it confirms the robustness of our Haliade-X 12 MW design, and gives certainty to our current and future customers who believe in the attributes of our platform. When we introduced the Haliade-X 12 MW we established a new paradigm in the industry, and we will continue to do so by innovating, improving, and introducing new features to our Haliade-X platform, making offshore wind a more affordable and competitive source of renewable energy.

As part of the certification, Dr. Kim Moerk, Executive Vice President for Renewables Certification at DNV GL said:

GE’s Haliade-X 12 MW is a significant breakthrough for the offshore wind industry. Developing new and innovative technology always brings an element of uncertainty and risk. Type certification is a vital measure to demonstrate that new turbines will operate safely, reliably and according to requirements and we are proud to provide our offshore wind expertise to this important new technology development and support our customers enter into new markets.

The certification will continue over the coming months to obtain a full type certificate for the turbine.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 metres
Height: 245 metres
Blade length: 107 metres
Annual energy yield: 46.3 GWh
Covered area: 38,000 m2
(These numbers are based on the SDE wind report)

General

Pondera Development and SIF Holding are developing the Haliade-X on the Maasvlakte in Rotterdam, together with GE Renewable Energy. Pondera made the development of this innovative turbine possible, thanks in part to its extensive knowledge of and years of experience with Dutch laws and regulations for wind energy. Upscaling of (offshore) wind turbines is important to be able to generate more sustainable energy, accelerate the energy transition and thus limit the effects of climate change. The  Haliade-X 12 MW is an important link in this development.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus will save 28.1 kilotonnes of CO2. From autumn 2019, the Haliade-X will generate sustainable energy on the SIF site on the Maasvlakte.

 

World record for Haliade-X 12 MW!

Pondera’s Haliade-X 12 MW prototype in Port of Rotterdam has just set a new world record! It is the first wind turbine ever to generate 288 MWh over the course of 24 hours. In the next 5 years, the Haliade-X prototype will undergo a series of tests to validate the turbine’s power curve, loads, grid performance & reliability. In addition, these tests will allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m2
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype is installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO2.

GE Haliade-X 12 MW supplies power

The GE Haliade-X 12 MW has delivered its very first kilowatt hours. The prototype of the world’s most powerful offshore wind turbine has now entered its test phase on the Maasvlakte in Rotterdam. The data collected during this phase will be used to obtain the required certificate in 2020. Subsequently, the serial production of the largest and most powerful wind turbine can start.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m2
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.


 

World’s most powerful wind turbine completely installed!

All three blades of the GE Haliade-X 12 MW are installed. The commissioning of the world’s largest and most powerful wind turbine will be completed in the coming weeks.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m2
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.


 

Installation of GE Haliade’s blades has started!

We are happy to announce that the installation of the first two blades of the GE Haliade-X 12 MW prototype has started. The third blade has yet to arrive at the Maasvlakte Rotterdam.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m2
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

Pondera’s GE Haliade-X 12 MW in the media

Last week the Dutch media was very enthusiastic about the fact that the Netherlands is the first country to place the world’s largest offshore wind turbine.

Key figures for the Haliade-X 12 MW

Capacity: 12 MW
Rotor diameter: 220 m
Tip height: 245 m
Blade length: 107 m
Annual energy yield: 46.3 GWh
Wind turbine swept area: 38,000 m2
(These numbers are based on the SDE wind report)

General information

Pondera Development and SIF Holding, together with GE Renewable Energy, are developing the Haliade-X on the Maasvlakte 2 in Rotterdam. The development of the innovative Haliade-X project in Rotterdam has been made possible thanks to Pondera’s extensive knowledge and many years of experience in Dutch wind energy legislation and regulatory policy. The increase in size and scale of (offshore) wind turbines is an important step in generating more sustainable energy, accelerating the energy transition and thereby limiting the effects of climate change.

The offshore wind turbine prototype will be installed onshore in order to ease access for testing and monitoring purposes. This will also allow GE to collect the data needed to obtain the Type Certificate, a key step in commercializing the Haliade-X.

The Haliade-X can generate 46.3 GWh of electricity annually. That is enough power for 15,900 European households and thus saves 28.1 kilotons of CO2. In the fall of 2019, the Haliade-X will generate renewable energy on the SIF site on the Maasvlakte.

GE’s Haliade-X 12 MW to be installed in Rotterdam

  • Agreement signed with Future Wind includes five years of testing and 15 years of service
  • Installation of Haliade-X 12 MW will take place during summer 2019

GE Renewable Energy and Future Wind (a Joint Venture between Pondera Development and SIF Holding Netherlands) announced today that they have signed an agreement to install the first Haliade-X 12 MW wind turbine prototype in Maasvlakte-Rotterdam (NL) during summer 2019. The deal includes five years of testing and a 15-year full service Operation and Maintenance agreement.This Haliade-X 12 MW prototype will be installed onshore to facilitate access for testing. During the initial period of operations, it will allow GE Renewable Energy to collect data needed to obtain a Type Certificate, a key step in commercializing the product in 2021.Activities in Rotterdam to prepare the site for future installation have just begun. The nacelle of the Haliade-X 12MW prototype will be assembled in Saint-Nazaire (France), while the three 107 meter-long LM Wind Power blades will be manufactured in Cherbourg (France), and the tower sections will be produced in Seville (Spain). All components will be shipped to Rotterdam, where pre-assembly work and installation will take place.This prototype in Rotterdam is part of the $400 (€320) million investment in the Haliade-X development announced by GE Renewable Energy in March 2018 to help reduce offshore wind’s cost of energy in order to make it a more competitive source of clean, renewable energy.

Pondera Consult supports this project with the following services:

  • Permits
  • Subsidy
  • Contract Management (Delivery, Maintenance and PPA)
  • Grid Connection
  • Operations and Asset Management